KeeperCycle - Celebrating Motorcycles
Great products I use, believe in and sell;
Black Widow Air Motorcycle Lift - $750
Check out the new black & orange heavy duty ProLift below
See our demo lifts in action at our Waukesha shop.
Call Ted for an appointment.
This premium motorcycle lift has a capacity of 1000 lbs and includes a rear tire drop panel. Add side extension & ramp sections ($250) to the motorcycle lift to accommodate ATVs. Perfect solution for service or storage of your motorcycle.
The Black Widow air operated premium motorcycle lift table and stand is high quality motorcycle lift. This lift will accommodate almost any motorcycle on the market. This motorcycle lift will raise motorcycles up to 1000 lbs for service, maintenance, cleaning, or bike shows.
$250 option (Adds 20 inches to total width - 10" per side)
Optional 14" front extension for long bikes $100 (92 3/4" total)
Black Widow Premium Air Motorcycle Lift Product Features:
$750 picked up at our Waukesha WI warehouse ($1000 with side extensions)
New ProLift demo - Come see it soon. Special Order Only.
Heavy Duty PROLIFT 1,500 lb Motorcycle Lift Table $1100
$125 in stock
The Black Widow motorcycle jack lets you lift the front or rear wheel of your motorcycle in seconds. This 28 lb jack has an amazing 1,100 lb lifting capacity. Simply slide the jack under your motorcycle, position it under the frame and turn the jack arm to raise the bike. This very affordable jack has a lifting range of 3-3/4" to 16-1/4" high. Made from heavy duty black powder coated steel. A rubber adapter on the top of the jack prevents slipping and scratching the frame of your bike
This motorcycle jack has a black powder coated finish and is adjustable from 3-3/4" to 16-1/4" to easily lift any bike.
The Black Widow Motorcycle Lift Jack is a sturdy motorcycle jack for a reasonable price. This motorcycle jack weighs 28 lbs and has a lifting capacity of 1,100 lbs to accommodate almost any type of motorcycle. The Black Widow jack features a durable glossy black powder coated finish. The total height range of the motorcycle jack is 3-3/4" to 16-1/4" high. You can get an additional 2" to 3-1/4" of height with the removable adapters that are included. To prevent slipping rubber padding has been added to the top of each adapter along with large bolts on the front to secure them in place. To increase the stability of the motorcycle jack a foot is welded onto each side.
This can save your life..
SDC headlight modulator $99 with Plug & Play Universal Harness
This can save your life. It alerts drivers that otherwise may pull out in front of you. I have one on all of my bikes. Flashes your high or low beam 4 times per second. Included sensor turns it off at night or you can turn it off at any time by cycling your high/low beam control switch twice. Often I even have drivers pull over and let me pass thinking I must be some sort of emergency vehicle. I always ride with my high beam on in the daylight and I always use the brightest bulb I can find regardless of cost. The State of Wisconsin official Motorcycle Riders Handbook suggests riding with your high beam in daylight hours. What is your life worth?
I simply want to live to ride another day. You do too!
Conspicuity is what it is all about! Frontal type accidents happen every day and are the most common and serious motorcycle accident. It freezes car drivers at stop signs and would be turners-in-front-of you more than 90% of the time. You need this.
No Excessive Heat Build-Up - Handles high power demand sealed beam and halogen headlights totaling up to 130 watts! Uses less power as the headlight is off almost half the time and the bulb runs cooler extending bulb life.
Surge Protected - Internal protection against transient voltage spikes during engine starts or charging system operation. Also drops out if voltage is too low, avoiding problems associated with low voltage.
Compact Size - 2 1/4" long X 1 5/8" wide X 5/8" high
Solid State Reliability 12V DC
Weather Resistant Heat Sink Case
SAE Connector - $5 Cut in half and you have two
Battery Tender Ring Terminal Harness $15
• Brand new
• Price includes mailing it to you or pick it up at our store
• 18" cord adaptor
• Plugs into all Deltran Battery Tenders & others
• Convenient for hard-to-access batteries
• Adaptor plug is compatible with most heated suits for motorcycles or snowmobiles
• This ring terminal harness includes a 7-amp fuse and is 2 feet in length
• SAE 2 pole plug on charger end
• SAE plug dust cap included
• I have SAE plugs available as well for accessories
• I use these on all my motorcycles cars trucks including my fork lift
• Connects directly to battery
• SAE plug dust cap included
• 5/16" Ring Terminals on battery ends